CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

replacing np205 adapter mounts

wazzabie

1/2 ton status
 Premium
Joined
Apr 17, 2001
Posts
2,922
Reaction score
447
Location
Washington State
What are the correct steps to replace these two adapter rubber body mounts? I have a np205-th350 setup. Pick is not my tcase but shows the adapter just for effect. With the tcase mounted to the tranny can I lift the tcase after removing these two bolts from the frame support?

part2-004-jpg.2819194
 
What are the correct steps to replace these two adapter rubber body mounts? I have a np205-th350 setup. Pick is not my tcase but shows the adapter just for effect. With the tcase mounted to the tranny can I lift the tcase after removing these two bolts from the frame support?

part2-004-jpg.2819194
You can do that and slide them out and in from the side or you can remove the crossmember if there’s not enough room.
Overall it’s a very easy job.
 

Latest Posts

Top Bottom