- Joined
- Apr 27, 2013
- Posts
- 76
- Reaction score
- 27
This is the B pillar with shoulder harness bar out of my rollcage. It’s all 2” .120 wall DOM with stake plates from DIY4X. I also have the stake plates for the A Pillars.
The bracket welded to them bolts too the shoulder belt in the K5. The stub tubes for the A pillars are 4” long.
I built this in the K5 so it should fit under a topper. I cut the A pillars off trying to reuse everything I could in my next project but it is too wide. I didn’t want to cut the rest of it up only for to not work.
150$ I’m in Dacono CO if you want to take a look at it let me know. Or if you want more/different pictures let me know.
Thanks
The bracket welded to them bolts too the shoulder belt in the K5. The stub tubes for the A pillars are 4” long.
I built this in the K5 so it should fit under a topper. I cut the A pillars off trying to reuse everything I could in my next project but it is too wide. I didn’t want to cut the rest of it up only for to not work.
150$ I’m in Dacono CO if you want to take a look at it let me know. Or if you want more/different pictures let me know.
Thanks
