Sale Pending

[spoolnaround]

I am parting out my Blazer. I dont know what I am going to do besides paying bills.

Dana 60 front 4.10:1 with Sky high steer and cross over, welded up......$1600.00
14FF 4.10:1 with disc brakes welded spiders.....$400
Stock 350 that needs valve seals but runs great...... $400
SM465/205 rattles a little $400
Side windows for a 74 blazer hard top $25.
Good driver fender $20
Alcan 56" springs with 2-3 inches of lift (if I remember right)......$200
6" lift springs (front, make??) with blocks....$100.
Rear drive shaft that has a newer 1350 yoke and u-joint at the dif end and is .134 wall tubeing.....$75
Beat up 74 body and frame with title....$100.

e-mail is [email protected]

 

[spoolnaround]

I dont want to mess with shipping but will deliver or meet you within 100 miles of Fresno Ca for Diesel $$.

Forgot the wheels and tires
5- 38.5X14.5X15 Super Swamper SX's on steel wheels about 50% tread. One tire has a split in tread but I still run it, one has about 50 miles and the all have minor rock rash.......$600.

 

[1979jimmy350]

do you have the brackets to mount the grill ?

 

[spoolnaround]

The grill is still in it so I would have to say yes. My rig is 40 minutes away and unless I sell the front end or the motor and trans Im not going up there yet. I would be happy to let you know when I do go and see if you still want them. Are these brackets you speak of spot welded on? I cant remember how those things are put in.

 

[obijuan]

do you have a measurement for the rear driveshaft and does it have any dents in it or anything to make it not usable for highway speeds? pics are good too.

 

[mtnman210]

I was looking at your shackle flip today....what size flip is that?


I was trying to figure out how I could just hook up the trailer and take the whole thing home but we drove the car up.

 

[spoolnaround]

I was looking at your shackle flip today....what size flip is that?


I was trying to figure out how I could just hook up the trailer and take the whole thing home but we drove the car up.

i can just deliver it to ya Devin.

 

[spoolnaround]

do you have a measurement for the rear driveshaft and does it have any dents in it or anything to make it not usable for highway speeds? pics are good too.

It would help help if I had this thing at my house but its not. the next time I am at my broothers house I will measure and photogrph for you.