CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Sale Pending
- Thread starter AZ79K5Project
- Start date
lak2004
1/2 ton status
how much for everything on top shipped to 81301?
PM'd you
how thick or deep is the big fan setup?
crash81
1/2 ton status
nice setup got size info on dual fans?
Here's a couple pics of the fans installed from my build thread - look at posts 130 through 132 (or so) for a few different pics of the fans installed.
[post=2460162]fan install post[/post]
Edit:
The fan is 26 3/4 wide and the tabs extend out 2" on each side
Overall width: 30 3/4
20 1/4" tall
4 1/2" deep
There are no names or markings that I found on the dual fan assembly. I got the dual fan from evil bay and ran them on my truck for a year or so. The dual was advertised as new and looked new. I bought the SPAL controller and pusher new on - line.
The SPAL is setup so one fan comes on on low speed when I start the engine and then both automatically turn on high at about 190 or if I turn on the AC (if wired to do so). I used the pusher for the AC. I had it wired to turn off the pusher when the duals turned on at temperature.
I went back old - school and went back to the mechanical fan.
[post=2460162]fan install post[/post]
Edit:
The fan is 26 3/4 wide and the tabs extend out 2" on each side
Overall width: 30 3/4
20 1/4" tall
4 1/2" deep
There are no names or markings that I found on the dual fan assembly. I got the dual fan from evil bay and ran them on my truck for a year or so. The dual was advertised as new and looked new. I bought the SPAL controller and pusher new on - line.
The SPAL is setup so one fan comes on on low speed when I start the engine and then both automatically turn on high at about 190 or if I turn on the AC (if wired to do so). I used the pusher for the AC. I had it wired to turn off the pusher when the duals turned on at temperature.
I went back old - school and went back to the mechanical fan.
Last edited:
what diameter are the fans themselves in the dual setup?
The diameter of each fan is 12.5". (tip to tip) The overall width is 13.5" if I include the outer edge of the circular ring connecting the fan tips.
thanks. a friend is looking for a fan setup so sent him link to this thread.
You willing to separate the Spal controller from the fans? How much?
Sure - send me a PM with what you think the controller and temp switch is worth.
PM sent.
