Sawzalls are $20 at Harbor, NOW I can trim fenders!

[FreedomIsntFree]

Reference this thread http://coloradok5.com/forums/showthread.php?t=148395

I bolted up my 37" TSL's last night. I've got a little trimming to do. But I think it's going to work fine with just the 4" kit. I did add an inch in the rear to fix the sag but it just evened it out.

So now I gotta buy some more discs for the grinder and get dirty. I'll throw up pics as soon as I get them! Cheers

So after doing one corner, I realized it was silly to use the grinder so I coughed up 32 bucks and change for a sawzall and some blades. Hopefully the other three fenders will go much smoother. ...need to fit those 37s

 

[dremu]

Reference this thread http://coloradok5.com/forums/showthread.php?t=148395

I bolted up my 37" TSL's last night. I've got a little trimming to do. But I think it's going to work fine with just the 4" kit. I did add an inch in the rear to fix the sag but it just evened it out.

So now I gotta buy some more discs for the grinder and get dirty. I'll throw up pics as soon as I get them! Cheers

You're doing it with a ? Wow, you're brave!

If you were closer, sure ... but you are 1700 miles away from me, so it's a bit of a commute

Dammit, now you have me about something bigger than my 35"s ... no, no, my 10-bolt would break... and I gotta try out the ARB in it BEFORE...

-- A

 

[NOWPARTS]

better buy more than one

I am on my 4th one not woth a darn!

 

[SlyDog]

Checkers also has a 4 1/2" angle grinder for 10 bucks till the first

 

[trailblazr81]

You know Ive bought a few tools from H.F. like impact wrench, sheer's.. that worked great. My buddy's bought power tools there with no problems... my paint gun I got there is crap. Pipe bender was cool too. Tho for a swaz-all I have a $350 commercial Dewalt. Has 2 battery packs that last for a while and an adapter to just go with the cord. Works like a Champ!! Like a hot knife through butta!!

 

[FreedomIsntFree]

Tho for a swaz-all I have a $350 commercial Dewalt. Has 2 battery packs that last for a while and an adapter to just go with the cord. Works like a Champ!! Like a hot knife through butta!!

Yeah if I had the choice I'd outfit my whole garage with Dewalt. But for the time being, gotta go with the cheap stuff. I do have a Dewalt 4 1/2" grinder though and it's a pretty sweet machine as far as grinders go!

 

[3rdshiftdesign]

I am on my 4th one not woth a darn!

Don't know why you'd get to #4 if they aren't worth a damn?



I've had my HF sawsall and grinder for about a year, and i beat the crap out of them and never even had to replace the brushes.

 

[az-k5]

I have their chop saw, grinders, 110V impact, pipe bender, and a few other items. The only tow I have really been disapointed with are their sawzall (broke on it's second use) and thier air-body saw (barely moves under its own power let alone when put against sheet).

 

[Stratispho]

only good thing about HF is that if you keep the reciept they'll give you a new one. since it's only a mile from my house if I burn something up I just take it back and start working on burning up the next one.

 

[bigjbear]

Don't try to cut HardyPlank siding with one of those saws. As always, you get what you pay for.