Wanted sbc spark plug heat shield

[sweetk30]

looking for 1 of there in decent shape . dont have to be 100% show quality . also need the little bolt that holds it to the block . 7/16 socket/wrench gets him off the block . dont even need to pull the plugs or wires .

this is going on my 80's budget beater build . orignal stuff was from 1987 c/r-10 pickup .

 

[imiceman44]

looking for 1 of there in decent shape . dont have to be 100% show quality . also need the little bolt that holds it to the block . 7/16 socket/wrench gets him off the block . dont even need to pull the plugs or wires .

this is going on my 80's budget beater build . orignal stuff was from 1987 c/r-10 pickup .

View attachment 282181

I might.
I will look

 

[sweetk30]

cool .

thanks .

 

[sweetk30]

 

[imiceman44]

I still can't get to my engine.
Hopefully by the end of the week.

 

[6872xtc]

Uuuhhhh, sorry... I saw this, looked and found a couple, forgot to respond or take pics..
I will try to remember tonight.

 

[sweetk30]

o.k. thanks guys .

 

[6872xtc]

Well I went to pull one of these and remembered very quickly that it's very difficult to get one off of an engine with manifolds still on it, and in a chassis.

No go tonight.

 

[sweetk30]

thats why i left the easiest one for last .

 

[Justin V]

Yo, @sweetk30

 

[sweetk30]

yo @Justin V


how much ? zip 14845 .

one on the left with 2 tin screws in the mounting bracket ?

might fit in small flat rate box with 2 screws out and seperate bracket from shield .

 

[Justin V]

PM'd