What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Sfa z71

D

DsZ71

Registered Member
Joined
Nov 1, 2010
Posts
41
Reaction score
0
Location
Fort Stewart, Ga
Well I have be gathering parts for my SAS. I have also be "restoring" the truck as i go. So far I have...

D44
--Specs--
5.38 gears
lockright Locker
Hysteer arms

DSCF0667.jpg

DSCF0663.jpg


4" Tuff Country leafs
P1000803.jpg
 
So far I have replaced both doors (no pics yet) and fixed the headliner


Before
P1000797.jpg


After
P1000798.jpg



I have also replaced my front speakers and installed a CD player in her.

btw, here is what she look's like (before i installed the new doors)
P1000732.jpg

P1000733.jpg
 
I am going to use ORD ( http://www.offroaddirect.com/ ) front and rear leaf hangers which will give me 3" of lift so I am looking at 7" of lift. Still need to order my rear 3" tuff country leafs, swap the front axle to a 6 lug ( or 8 depending on what rear axle i go with) but I will prob just say 6 lug since my current rims will work with the tires I plan on running which are 37x14 Iroks.

I am also thinking about ordering this.
http://eastcoastgearsupply.com/i-4272428-1-ton-hd-steering-kit.html
 
Off Road Direct, Will be @ my house tomorrow. I didn't get the kit because I didn't want to run dual shocks.
 
beefy, good luck man. ill be watching ya, im doing soemthing like this on mine too.
 
I love luverne grill guards! Does the d44 hysteer arms have bolts only or are there conical washers holding the arm down? Also, do those sfa brackets have any lift or are they neutral?
 
Not stepping on you, but you might want to read up on the pros of conical washers if they arent there. Thanks for the info and good luck with the build
 
Well I replaced my doors with doors from a Chevy 3500, since they had them big mirrors, well they only had the brackets for them, so i removed them, and patched the holes.
This was my first time doing body works..

Drive side (still needs to be sanded)
028.jpg


Pass side, sanded and started priming, ran out of primmer.
029.jpg
 
You must log in or register to reply here.

Latest Posts

Top Bottom