BowtiePimp
Registered Member
I need to replace the linkage in my truck that goes from the column to the transmission ne1 know where to get it from?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Shifter Linkage
- Thread starter BowtiePimp
- Start date
i have a set in the garage someplace.
or you can by a lokar cable conversion kit to eliminate the linkage and make it a cable. http://www.lokar.com/product-descriptions/col-cable-shift-link.htm
or you can by a lokar cable conversion kit to eliminate the linkage and make it a cable. http://www.lokar.com/product-descriptions/col-cable-shift-link.htm
BowtiePimp
Registered Member
I was looking at them if I get that do I need the Backup Light and Neutral Safety Switch Kit??
Matt J.
1/2 ton status
Why replace? Is something broken? Is the linkage completely missing? When I bought my burb, the shifter linkage was out of adjustment but it was pretty simple to re-adjust. I forget if it was my Haynes manual or the Chilton manual but it gives a step by step procedure to adjust. Mine was pretty bad. It would pop out of park into reverse while warming it up in the morning!
BowtiePimp
Registered Member
it was out when I got the truck and it is all bent up and missing the bushings and stuff for the linkage figured it would be easier to replace then find another?
nope the switch for backup and p&n is on the inside of the truck on the colume .
i will need a few days to dig out linkage if you need it. and if so please send me a private message .
i will need a few days to dig out linkage if you need it. and if so please send me a private message .
