Short Wheel studs

[Mudslutk51984]

I need some wheel studs that are over all 2 inches.. but they need to be 7/16 20 with a Knurl size of .565 and a shoulder length of.875 which is stock.. just need that in s 2 inch length and can’t find anything in town or online

 

[Mudslutk51984]

I’m putting some 2 inch hub centric spacers on but they only grab the depth of the lug nut which is about half or 3/4 an inch (can’t remember).. thoughts about the studs coming to the top of the spacer nut? PS tried editing the post but I’m unable to for some reason

 

[rampage]

Dorman has them. You measured overall length but they list them as underhead length. Part # 610‐179 for 10 of them or part# 610‐179.1 for individual studs.

https://www.dormanproducts.com/pages/products/wheel-hardware/index.aspx

 

[Mudslutk51984]

That’s what I meant under head length. On my tape measure as if it were mounted, it’s at 1-3/4 but I need an extra 1/4”.. I looked in that entire parts list and couldn’t find anything. That 610-179 is a part I picked up from auto zone and I was in the same boat

 

[obijuank5]

Look into open ended ET shank lugs. That should solve your problem with the stock studs.