cegusman
3/4 ton status
Need to pull my detroit locker out. what size washers do I need to hold it together?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
size of washers needed to pull a 14bolt detroit locker
- Thread starter cegusman
- Start date
Mudstud
1/2 ton status
Been awhile but we used wide diameter washers with a small hole in it (for the threaded rod/bolt). Maybe an inch to 1.5" with a hole of about 3/16 od 1/4" should do it. Hope that helps.
The OD of the washer will need to be larger than an axle shaft so I'd guess 1 3/4" or 2" OD, pick the ID to match your all-thread.
cegusman
3/4 ton status
Got it down this weekend
And what size washer did you use.........
Stomis
Professional Amateur
Size = Blue
cegusman
3/4 ton status
Not sure ended up having to grind it to fit.
