skid plate

[NoSmog73]

Ok crawled under the blazer today to check the u-joints (another vibe ? later )and was looking at the 203 and the rear of the TC is hitting the small aluminum like it was tilting down and loosening up the bolts(about 3/4"loosened) that are to be holding the skid plate on, Now can I ditch the 2nd crossmember and the skid plate It looks like neither one is attached to the TC..I pushed up and down on the TC and it never moved at all But will check in the morning with a jack to see if the TC mounts are worn any thoughts??????????????

 

[thatK30guy]

I would be interested in buying the skid plate and the two "L" shaped brackets on the frame that hold the crossmember from you. I don't need the second crossmember though.



<font color=red>Only real men drive K30's!!!</font color=red>

<a target="_blank" href=http://coloradok5.com/gallery/thatK30guy>The K30 Collection</a>

 

[NoSmog73]

ttt

 

[K10ANDYKHAMNIC]

if u wheel leave it there and tighten it up

pics page
<a target="_blank" href=http://www.imagestation.com/album/pictures.html?id=4292257869&show_all=1&start=1>http://www.imagestation.com/album/pictures.html?id=4292257869&show_all=1&start=1</a>

always gets me home K10 STEPSIDE