Skyjacker brake line length?

[Stomis]

Im trying to source some stainless lines for the street truck. sky jacker
FBL17 lines are for a square body with a 2-4in lift. Was curious if anyone knew how long they are? Not having any luck finding that info.

 

[Stomis]

Or maybe does anyone with a 4in kit have a rough measurement on how long their lines are up front?

 

[rampage]

Got mine from ORD.

 

[thearborbarber]

I used these for the right side;
http://www.napaonline.com/napa/en/p/UBK38621

And these for the left side;
http://www.napaonline.com/napa/en/search/?text=38620

They are 21 inches long and I ground the bracket off in the middle.

 

[Stomis]

I used these for the right side;
http://www.napaonline.com/napa/en/p/UBK38621

And these for the left side;
http://www.napaonline.com/napa/en/search/?text=38620

They are 21 inches long and I ground the bracket off in the middle.

Well Im specifically looking for braided stainless. Theres not much out there in the generic variety unless its -3 so I need to find an application with banjo on one and, 3/16 IF on the other and about 16-18in long.

 

[toomany]

I was in the same boat. Looked at the Skyjacker kit even. I ended up going with lines from WFO. They are -3 on the ends, but even with the adapters to inverted flare and banjo fittings...it came out about the same price. A little more expensive, but I have lines exactly how long I need them and was able to pick up a spare easily without having to buy a whole kit. After doing this project with them...all my future ones will go this route.

Lines, http://www.wfoconcepts.com/cr/Brake-Lines/3189/3890

Fittings, http://www.wfoconcepts.com/cr/Brake-Line-Fittings-Clips-and-Brackets/3189/3923

FWIW, Summit has some fittings cheaper. I bought my banjo's there. Summit brand which turned out to be re-bagged Russell.