Sliders

[4X4HIGH]

Thought I would share a pic of my rock sliders. I just got finished mounting my Rock sliders I bought from Kert.

 

[munepit]

They look good. Now post some pics of the whole rig Scott. I want to see some detailed pics of what you got in that thing!!

 

[4X4HIGH]

Ok already, i've been too lazy to take any pics until now so here are a few I just took especially for you munepit.

 

[4X4HIGH]

Here are the last five pics.

 

[munepit]

Thanks, About time!! I like it a lot. I like the airtank, Looks like it fits perfect up in there. Like the Y pipe also. I going to do that next time, Back bumper is sweet!! I ordered a balistic springless crossover arm, going to do hydro assist like yours also. Thanks bud!!!!

 

[4X4HIGH]

No problem, if there's a specific pic you want let me know and i'll take it.

 

[munepit]

Cool, I will in the furure for sure. Thanks!! Looks sweet!!!

 

[wasted wages]

Hey Scott.......That Y-pipe double as a transmission fluid warmer ??

 

[4X4HIGH]

Hey Scott.......That Y-pipe double as a transmission fluid warmer ??

Actually, I run a trans temp gauge and even after I had the shop build that Y pipe the fluid temp never changed.

 

[ryoken]

Scott, that's where I'm gonna run my air tank too... how many gallon is that one? I need to do some measuring and see how big I can go.... I've been eyeballing some decent size ones, like 15 gallon... with the custom floor and 1" BL I have a fair amount of room back there...

 

[wasted wages]

Actually, I run a trans temp gauge and even after I had the shop build that Y pipe the fluid temp never changed.

looks dang close......

 

[kgblazerfive]

Man my eyes are really hurting now, I can't imagine why ?

 

[4X4HIGH]

Scott, that's where I'm gonna run my air tank too... how many gallon is that one? I need to do some measuring and see how big I can go.... I've been eyeballing some decent size ones, like 15 gallon... with the custom floor and 1" BL I have a fair amount of room back there...

The tank you see is only 2.5 gallons. I have a York 210 compressor and it does everything i've asked of it with just that 2.5 gallon tank and when I do use the air the engine is only idling. If I were to make some kind of hand throttle so I could control the speed then it would be even better. I can run a die grinder which consumes the most amount of air for an air tool.

 

[Big Blzn]

Scott must have gotten lost and put this in the lounge. Or has scott become a lounge lizard and forgot about the OTHER forum section?

 

[dremu]

TECH IN TEH LOUNGE!!!

-- A

 

[Hogback Fabrication]

Rear shocks are upside down

 

[blowedupmotor87]

Sliders look sweet bro! Great lookin truck overall!

Hope ya don't mind a little hijack:
Quick question for ya on your spare tire mount, looks as is if swings out toward the drivers side, and obviously the tire is biased toward the drivers side, how do you like that setup? I have been thinking I may eventually setup mine that way (since my plate is already mounted on the passenger side of my tailgate anyway) but (other than yours), it seems like everybody either centers their spare or biases its placement to the passenger side with the swingout to the passenger side too. I was just wondering how you've liked it so far and if the visibility out the back seems good with your setup. Thanks for your time bro! BTW, your rear bumper/tire carrier/jerrycan holder setup looks great!!!

 

[chevyfumes]

TECH IN TEH LOUNGE!!!

-- A

I knew that was coming and strangly enough I knew it'd be from you.

 

[4X4HIGH]

Rear shocks are upside down

Actually, the 99012's can be mounted in either direction. The 999012's (this is what replaced the 99012's) if mounted this way would be upside down as they are directional.

 

[dremu]

I knew that was coming and strangly enough I knew it'd be from you.

Well it's either that or

Which actually sounds really good right now, dammit...

-- A