but I'll ask anyway case I don't know
will a nv4500 bolt up to a sm465 bell housing...?
will a nv4500 bolt up to a sm465 bell housing...?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
sm465 vs nv400 - silly question...
- Thread starter Big Ray
- Start date
No, not without machining, redrilling etc.
Factory bell, or aftermarket like Advance Adaptors.
Factory bell, or aftermarket like Advance Adaptors.
ahhh, I see
thank you
thank you
so, what factory hydro bell housing do I need to make a nv 4500 work on my 90 burb...?
there's no way I can spend the $$$ for the AA unit...
there's no way I can spend the $$$ for the AA unit...
Well, the factory bell puts the slave cylinder in harms way, right above the driveshaft on a pass output combo.
AA has a bell that's ~$400, can't remember the pn# but it's the one I used. When I'm less hammered I'll see if I can dig it up.
AA has a bell that's ~$400, can't remember the pn# but it's the one I used. When I'm less hammered I'll see if I can dig it up.
Jimbo*
1/2 ton status
The later model bell(95-2004) will work, but requires an internal slave($$)
I wonder if you could use a Lakewood blowsheild setup ?..probably have to use a mechanical clutch linkage and modify the bellhousing to accept the NV4500??..
