CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

smog pump delete, check light?

destro360

Registered Member
Joined
Nov 24, 2008
Posts
88
Reaction score
0
Location
manteca/stockton, california
whats up friends? have not been on in a bit as my truck is tore in pieces.. i'm swapping out motors. anywho.. i do not have to smog my 87 with tbi 5.7 i plan to take off the smog gear and set it aside. i'm just worried that it may set a check light? not too sure. any info here would be great. thank you much.:bow:
 
What are you planning on taking off? TBI needs most everything to run right.
If you have a California truck with AIR you can remove that part without causing any problems. but all other sensors must stay.
In Ca i dont think You will pass smog without the AIR system .
 
What are you planning on taking off? TBI needs most everything to run right.
If you have a California truck with AIR you can remove that part without causing any problems. but all other sensors must stay.
In Ca i dont think You will pass smog without the AIR system .

haha i should have been more descriptive.. i'm just planning to remove the smog pump, or "air injection pump" the county i live in does not require smog so im not too worried. of course i would not remove any sensors. everything will be intact except the air pump and tubing. there is a 3 prong connector that connects to it and im worried that having it disconnected will set a light...
 
You can remove the air pump. Souldnt have any trouble codes with connector removed. Plug the vac line going to it.
 
The 1227747 ECM Switch Parameters:

Burst Knock Retard Option (X=Enabled)
Open Loop Decel AFR Option (X=Enabled)
Manual/Auto Transmision (X=Manual)
TCC Unlock in DFCO (X = Enabled)
Err 13, O2 Sensor Diag (X=Enabled)
Err 24, Vehicle Speed Diag (X=Enabled)
Err 32, EGR Diagnostic (X=Enabled)
Err 33, MAP Sensor High Diag (X=Enabled)
Err 42, EST Diagnostic (X=Enabled)
Err 43, ESC Diagnostic (X=Enabled)
Err 44, O2 Sensor Lean Diag. (X=Enabled)
Err 45, O2 Sensor Rich Diag. (X=Enabled)
Err 54, Fuel Pump Relay Diag (X=Enabled)

No Error codes for AIR / SMOG pumps.

The screen shot .jep is from my Tuner Cats PROM tuning software.

dave w

7747 Error Codes.jpg
 
Last edited:
Top Bottom