( SOLD )315/70/17 bfg at on h2 rims qty=5

[sweetk30]

i am checking for interest in my 5 hummer tires & wheels. thay are 3/4 tread and rims real good with 4 hummer center caps . 1 spare rim has a red paint scratch on the face from a body panel that fell on it when stored in my trailer. and just a bit of the good old bird poop also.

the pics show the vary good condition of the rims and tires. + no major clip on wheel weight marks on the outside lips. mabye the tinyest as thay were new take offs when i got them and rebalenced diffrently at work.

thay ride smoth and nice at 35 psi on my 1ton. if i recall 1 tire has a plug patch in it from a nail. but no leaks now as i used the better plug and patch all built in to 1 and fixed at work the right way.

pic#1 & #2 is the spare and paint scratch.
pic#3 & #4 is the lf on the truck the rest look the same .
and center caps still in bubble wrap in garage.

my zip is 14845 ny pa border area.

would like to get 625 for all of them or best offers. seen a few sets still going for 550 for 4 wheels/tires. thats about 135 per tire/wheel. i will toss in the 5th wheel/tire for 75 more thats half price.

let me know if you would like to deal. and if you want you can arange shipping from my zip. i have ups terminal / fedex ground & regular terminal / and forklift at work so truck freight would be avalible with out lift gate requirement. but you pay shipping and handle all other parts of it.

 

[twoslo4five0]

whats the load range on the tires.i want the wheels but dont need the tires.

 

[sweetk30]

http://www.bfgoodrichtires.com/specs/all-terrain-t-a-ko/44.html

load ( D ) 3195 lbs at 50 psi for the gm spec ones.

 

[twoslo4five0]

i need e's

 

[sweetk30]

load range has some to do with needs. look here.

225/75/16 ( e ) = 2680 @ 80
245/75/16 ( e ) = 3042 @ 80
265/75/16 ( e ) = 3415 @ 80
285/75/16 ( d ) = 3305 @ 65
285/75/16 ( e ) = 3750 @ 80

then the h2 stock bfg tires are :

315/70/17 ( d ) = 3195 @ 50

most stock chevy trucks come with 245/75/16 on srw trucks and the 225/75/16 on drw . these are well within ranges of each other. so dont let a weight rating letter fool you. look at the max weight @ max pressure and go from there.

 

[twoslo4five0]

i also dont need a tire that big.285s already bog my truck down.im reagearing to 456s and putting 245s back under.im pulling around 11k so i dont need anything that big nor want it.i just need the wheels if you seperate

 

[sweetk30]

will see what happens. got a few locals lookin. if i did it would be around 350 + s&h for the 5 rims. then i got to find boxes and pack them what a pita dont realy want to go threw that ya know.

 

[sweetk30]

ttt make offer within reason. possible 1/2 way within reason also.

 

[pseudomike]

Got any pics of them on the truck.

 

[sweetk30]

yep. not run in salt / snow my self tho. just moved plow in summer after painted. took pic hen. and tie rod clearence on dana 60 stock steering and drop drag link.

 

[pseudomike]

What would you have to do to run the centers again? Front is obvious, do the rears clear the FF hubs? how much lift on that k30?

 

[sweetk30]

cut holes in fronts.

srw 14ff will prob fit fine.

or truck centers fit i have sen and been told.

1 set of conversion lug nuts off ebay for about 60 bucks. gives you the threads on the outside like the factory ones and caps clip to them. but has 9/16 threads for older trucks.

 

[blazin' j]

still have these???