What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

SOLD - Please Delete!

wheelingdrummer

wheelingdrummer

1/2 ton status
Joined
Jun 9, 2005
Posts
285
Reaction score
0
Location
Boulder, Colorado
-Complete Dana 60 High steer Set up for a Dana 60: $Sale pending
-Drivers side high steer arm for 1 ton tie rod ends. The powder coating is peeling off in some areas but overall it is in good condition. (Poison Spider Customs)
-Passenger side high steer arm for 1 ton tie rod ends. Same condition as the Drivers side. (Poison Spider Customs)
-1" spacer for those who need the extra room (Poison Spider Customs)
https://www.spydercustoms.com/index2.php
-Three(3) 1 ton tie rod ends (NAPA) and 1 3/4 ton tie rod end for the pitman arm(ORD)
-Tie rod from ORD that is cut shorter in the middle so you can run 1 ton tie rod ends instead of the 3/4 ton that ORD gives you! It was cut in half and then ground a 45° angle on each side there was room to weld. Then ground the weld down so it was flush with the rest of the pipe and then slid the sleeve over that and welded that. VERY STRONG! New powder coat (tan). Never installed!
-Drag link from ORD that had the same thing done to it so I could run a 1 ton tie rod end on the high steer arm and a 3/4 ton on the pitman arm. Also VERY STRONG! New powder coat (tan). Installed but never driven!

Prices for everything BRAN NEW:
-DS High Steer arm..............$126
-PS High Steer arm..............$126
-Spacers...........................$58 ea.
-Three 1 ton tre's...............$50 ea.
-3/4 ton tre's.....................$95 for the pair on ORD ($47.50 ea.)
-Tie rod............................$85 -Drag link.........................$95
-Powder Coating.................$25
TOTAL..............................$770.50

Kyle
(720) 394-5660
 
Last edited:
How much for the flip kit and shackles to 33175? Can the powder coating be painted? My trucks orange, so the tan would look wierd. Also can i get pics

Thanks,
Alex
 
88trailblazer said:
How much for the flip kit and shackles to 33175? Can the powder coating be painted? My trucks orange, so the tan would look wierd. Also can i get pics

Thanks,
Alex
Click to expand...

I think I would like to get $170 + shipping for the both of them if I got the shackles powder coated. You can paint the powder coating, it is just not going to stay on very well because you will be painting plastic, which is what powder coating is.

I was going to try and take some pictures tonight of everything but the owner of the shop that I am doing the swap at left for the night so I will try and take some pictures tomorrow.

I also have no idea what shipping is going to be like?

Kyle
 
Interested in the Zero Rates, 4" DIY4X Cross Tied Shackles, and DIY4X Shackle Flip if not already gone and after the guys ahead of me. What would shipping be to 67410
 
stephan.laun said:
Interested in the Zero Rates, 4" DIY4X Cross Tied Shackles, and DIY4X Shackle Flip if not already gone and after the guys ahead of me. What would shipping be to 67410
Click to expand...


I'll pass on the flip and shackles. I need to fix some other things before i move to the flip project. Good luck with the sale.
 
I am interested in the shackle flip and the zero rates if they are not spoken for. The shackle flip is for 4" right?

My zip is 82716 and can do paypal.
 
twoslo4five0 said:
but im putting a 60 in...can you get some pics please??
Click to expand...

I could have the steering set up all ready to ship sometime this weekend. If your not in a rush, I could get the high steer arms and the spacers sand blasted and powder coated the same color as the tie rod. Just let me know if you are still interested.

Kyle
 
also let me ask you is the taper on the arms for 1ton tres???also where the tre for the dragling is that tapered for 1 ton tres also??
 
You must log in or register to reply here.

Latest Posts

Top Bottom