What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

SOLD - Please Delete!

twoslo4five0 said:
i deffinitley have to wait till the end of the week but i will let you know...also will the arms work with a ford 60??
Click to expand...

No rush but let me know as soon as you find out. I think the arms will work for a ford, try asking around.

twoslo4five0 said:
also let me ask you is the taper on the arms for 1ton tres???also where the tre for the dragling is that tapered for 1 ton tres also??
Click to expand...

The taper on the arms are for 3/4 or 1 ton tie rod ends. I just said that you need to buy 1 ton tie rods ends because that is what the tire rod is cut to length for because the 1 tons are alot longer than 3/4 tons.

All of the mounting positions on the high steer arm are meant for tres not hiem joint.

Kyle
 
twoslo4five0 said:
can you get me a shipping quote to 23237 whenever you get a chance
Click to expand...

Once I have everything off I will try and weigh it and see how much shipping would be.

It's going to be a little more expensive than most because it is going to be an oversized package.

I'll get back to you:D

Kyle
 
Last edited:
Do you also have the passenger side arm for the crossover, or is this only to convert to highsteer from crossover?
 
im out man..im just gonna order all my stuff at one time from one company..if you had the draglink and pitman arm it would be a diffrent story though
 
Question for ya, is your pass. side arm from ORD or poison spyder? If I buy your hi steer setup I would also buy a crossover kit from ORD to match, but I wonder if the mounting location for the tie rod ends would be the same on different brand arms?? Also did you cut the tie rod and weld it or did ORD? Whats your bottom dollar on the arm and the tie rod? Thanks, Kevin
 
KevinsK5 said:
Question for ya, is your pass. side arm from ORD or poison spyder? If I buy your hi steer setup I would also buy a crossover kit from ORD to match, but I wonder if the mounting location for the tie rod ends would be the same on different brand arms?? Also did you cut the tie rod and weld it or did ORD? Whats your bottom dollar on the arm and the tie rod? Thanks, Kevin
Click to expand...

OK so if you would want to buy the passenger side arm I would be willing to sell it for $100 more added onto the cost. I went ahead and knocked $25 off the total cost so a total of $350 + shipping.

Things you would have to buy in order to do high steer:

2 - 1 ton tie rod ends - for the tie rod from Napa $90
1 - drag link from ORD $95
2 - 3/4 ton tie rod ends - for the drag link from ORD $95
1 - pitman arm from ORD $70

And then you would be all set up for high steer:D You may be able to order the crossover kit and ask them to keep the arm and see if that would save you some money.

I have the tie rod professionally cut and welded so it should hold up to anything you put it up against!

Kyle
(720) 394-5660
 
Unless you are willing to go a lot cheaper on the 2 arms and the tie rod I'm out. A brand new ORD hi steer kit $800. After I buy 4 ends, the draglink, and the pitman I'm in for $700 plus shipping and not all of it is new. If you decide to firesale the 2 arms and the tie rod I'll buy em. Thanks, Kevin
 
KevinsK5 said:
Unless you are willing to go a lot cheaper on the 2 arms and the tie rod I'm out. A brand new ORD hi steer kit $800. After I buy 4 ends, the draglink, and the pitman I'm in for $700 plus shipping and not all of it is new. If you decide to firesale the 2 arms and the tie rod I'll buy em. Thanks, Kevin
Click to expand...

You have a PM:D

Kyle
 
Updated the first post.:D

I have decided to sell the high steer set up as a whole and I now have another set of zero rates!

Kyle
(720) 394-5660
 
$25 plus shipping!

My guess is that the shipping will be around $5, not sure exactly though.

I can have them shipped in the next couple of days!

Kyle
 
You must log in or register to reply here.

Latest Posts

Top Bottom