k5s10
Registered Member
Sold
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Sold
- Thread starter k5s10
- Start date
k5s10
Registered Member
bump
Brians89K5
1/2 ton status
I have the raised pitman arm for my 4 inch lift with a stock steering arm. Would this work at cleaning up my angle? Or would this be too much lif/drop? Thanks
~Brian
~Brian
k5s10
Registered Member
Brian,
This pitman arm drops the draglink mounting point 2" from stock pitman arm location improving draglink angle and steering radius.I bought it to use with my 6" lift but changed to crossover steering instead.
Johnny
This pitman arm drops the draglink mounting point 2" from stock pitman arm location improving draglink angle and steering radius.I bought it to use with my 6" lift but changed to crossover steering instead.
Johnny
m1ndless
Banned
So this would improve my steering?
k5s10
Registered Member
M1ndless,
It will improve steering if you have a steep draglink angle.
It will improve steering if you have a steep draglink angle.
m1ndless
Banned
I just did a 4" lift and have the stock arm, it looks alot different than that. I am switching over to a suspension lift with a new steering arm for lifted trucks so I will see then.
k5s10
Registered Member
M1ndless,
If you are going to use a raised steering arm with your new suspension I wouldnt use a dropped pitman arm also unless you are going with alot of suspension lift.
~Johnny
If you are going to use a raised steering arm with your new suspension I wouldnt use a dropped pitman arm also unless you are going with alot of suspension lift.
~Johnny
k5s10
Registered Member
ttt
01maroonz71
1/2 ton status
PM sent
