sold

[kevin400ex]

i bought a 5th wheel trailer so im selling my 73 crewcab project. it started out as a 2wd. converted it to 4x4. it has a front clip and doors off a 88 suburban, doors are all power with grey interior panels. engine and trans are from the same 88 suburban, they are a 454 bigblock and t400. i have a bunch of extra parts for it as well.

some extra parts include: complete tbi harness, throttle body and ecu for bigblock, all charcoal interior trim peices, fiberglass shell, couple receiver hitches, 40 somthing gallon suburban tank with frame mounts, original rear doors, other misc stuff

truck is currently registered non op.

ok, need this gone. ill let it go as it sits just without the wheels and tries (i have some rollers to put on it for towing)

sold

 

[rdn2blazer]

Nevermind.

 

[imiceman44]

Nevermind.

I know what you were thinking.

 

[kevin400ex]

willing to deal on things too. im sure nobodys gonna pay the price im asking with the big wheels and tires, i pretty much plan on keeping those anyways as they have zero miles on them and would look pretty good on my k5

shoot me offers with what your thinking, worst i can do is say yes :

 

[6872xtc]

Why, why do you have to torture me like this!!!! I have some rollers, springs are built across town, CRAP! I would cost me big money to come get it with my buddie's Dmax that got ordered with 4:10's...but he has a trailer that would haul it...

 

[6872xtc]

And now my brain says "yea, then sell the '79 K30 that only has 2 doors, talk to Iceman and see when he will be out here on I-70 with some space on that '53 footer....." Crap, how am I going to get any sleep???

Did you get a T-case in it yet? I can't remember.

 

[kevin400ex]

No I didn't get a tcase installed in it. I do have a 4x4 t400 that was mated to a 203 I could possibly include

 

[6872xtc]

Of course having this truck illness, I want to know more about the truck... but I suppose since I have plenty of things that need done on my trucks, plus a build I am doing for a buddy, I better pass. It's hard to pass up as it would only be 750 miles one way... I already estimated fuel costs and such..

 

[kevin400ex]

found some rollers for it, ill leave the lift springs on it. i have a 4x4 t400 to go with it, extra steering coloumn, bed will be full of parts.

all it would take is a weekend to get it running.

$1500

ill add more pics tomarrow

 

[y5mgisi]

Good deal!

 

[max 02]

Did you have to change it too 1500.00

I wanted to see you finish that truck, I`ve been watching since you started it.

Why is it all the things I like are so far away.

Good luck on the sale...should sell quick for that price.

 

[6872xtc]

Ok so this is like holding a box of donuts up in front of a fat kid.. Now I'm back to wanting to know more. Is this truck as rust free as it looks? Did you get the harness installed for the windows and locks? Or is the harness on the list of "to do's" ? Can it sit until the weekend of the 14th? (since next is Easter) That would be 2 weeks though.

Maybe i should hold onto my round pattern 205... I better not pick up the phone to dial...

 

[kevin400ex]

the truck is fairly rust free, theres some bubbling in a few spots but no obvious cancer/holes. i have the complete window and lock harness for it, just need to put it in and hook it up. i also have the complete harness from the 88 suburban i got everything from, without a single wire cut. i also have the ecu, throttle body and all the snesors and stuff for the efi. the truck has a set of doug thorley headers, a edelbrock manifold and 1400 series carb, hei distributor. i installed a huge stacked plate design trans cooler with an fitting and braided pushlock hose. the front axle has 4:10's in it (10 bolt) i have some shocks that may work.

some parts i dont have for it are brake lines up front, front calipers, transfer case.

i can let it sit like this for a couple weeks.

 

[6872xtc]

Ok, I'm still thinking, so don't hold it for me. I am interested, but as I said before, I have a lot that I need to do right now so I probably shouldn't even be looking at this at all. BUT I am. I will get back to you tommorrow night.

Thanks

 

[6872xtc]

I know I seem like I can't make up my mind and I apologize. I am going to have to pass. This is a helluva deal, but I wouldn't like having to have it sit here until next year when I could get to work on it. I hope someone buys it soon to help you out.
Thanks,
Dave