Time to get rid of some stuff,
1. 99% rust free bare cab off of a 86 2wd 1 ton (has a some bubbles in cab corners)I am keeping the doors and seat $250
2.complete front clip off of same truck, hod might have some bondo (not sure about that though) from what I can tell it is rust free also $250
a few pics http://coloradok5.com/photos/showgallery.php?cat=9624
3. 87-up mass air TPI has intake,runners (a few dents)
pluentum,injectors,fuel rails,EGR valve,mass air sensor,
computer, and the harness it has a few cut wires from what
I remember I have not looked at it for awhile, I have $450 so this price is firm $450
4. 8 lug parts off a 1979 DANA 44, backing plates and hubs are in good shape but the rotors are toast
$150
5. Dana 44 drive slugs,springs,and caps $35
6. Vortec heads, edlebrock Intake, throttle cable bracket,proform black crinkle valve covers, reuseable valve cover gaskets, ARP head bolts,push rods, New fel-pro intake gaskets,and steel shim head gaskets (don't remember what brand) the heads had 21k on them when I bought them I went ahead and had them magnafluxed and the valves ground, and had new valve stem seals installed before I used them, I ran them approx 7k miles, these are not off the engine yet, Will pull as soon as they are sold, $1000 FIRM
7. factory set of center bolt valve covers $10
All prices are OBO unless stated, Shipping on your dime
I don't want to seperate as of now
1. 99% rust free bare cab off of a 86 2wd 1 ton (has a some bubbles in cab corners)I am keeping the doors and seat $250
2.complete front clip off of same truck, hod might have some bondo (not sure about that though) from what I can tell it is rust free also $250
a few pics http://coloradok5.com/photos/showgallery.php?cat=9624
3. 87-up mass air TPI has intake,runners (a few dents)
pluentum,injectors,fuel rails,EGR valve,mass air sensor,
computer, and the harness it has a few cut wires from what
I remember I have not looked at it for awhile, I have $450 so this price is firm $450
4. 8 lug parts off a 1979 DANA 44, backing plates and hubs are in good shape but the rotors are toast
$150
5. Dana 44 drive slugs,springs,and caps $35
6. Vortec heads, edlebrock Intake, throttle cable bracket,proform black crinkle valve covers, reuseable valve cover gaskets, ARP head bolts,push rods, New fel-pro intake gaskets,and steel shim head gaskets (don't remember what brand) the heads had 21k on them when I bought them I went ahead and had them magnafluxed and the valves ground, and had new valve stem seals installed before I used them, I ran them approx 7k miles, these are not off the engine yet, Will pull as soon as they are sold, $1000 FIRM
7. factory set of center bolt valve covers $10
All prices are OBO unless stated, Shipping on your dime
I don't want to seperate as of now
