2many
Registered Member
2" or 3" In the rear for 14 bolt to run H1's, where is the best place to buy? eBay? What kind?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Spacer/adapters for H1's
- Thread starter 2many
- Start date
chulisohombre
1/2 ton status
From what I've seen people are running 2 inch front and rear.depends also if you have single or duel wheel axles.
2many
Registered Member
Im running a dual wheel 60 front and a single wheel 14ff in rear bout 6inch lift 43tslsx.
Anyone else running this combo?
Im running a dual wheel 60 front and a single wheel 14ff in rear bout 6inch lift 43tslsx.
Anyone else running this combo?
Mine is pretty close except I've got 7"~8" lift. This pic has 2" spacers on the rear. There are more pics in the links in my sig, any pic with SX's & H1's has 2" spacers in the rear.
chulisohombre
1/2 ton status
From what I've heard here the dual wheel front can run h1 with no spacer. Your rear single wheel will need 2 inch spacers to compensate.
chulisohombre
1/2 ton status
Well there you go. And that looks real good too. I think on the rear the only way to not need spacers is to have the van width 14ff.
I'm still mad Interco decided to release these tires just a few months after I bought my 42" TSLs, the sx just looks so much betterMine is pretty close except I've got 7"~8" lift. This pic has 2" spacers on the rear. There are more pics in the links in my sig, any pic with SX's & H1's has 2" spacers in the rear.
dana 70 HD from a dually is what the H1 guys tend to run in the back
2many
Registered Member
That's the set up in my pic.
I thought oh running 70hd in the rear? I've got a 70hd going in the rear that I'm going to swap 14bolt single wheels hubs on but it's not ready yet to go in yet. I've been running just steel wheels til I got it together. But I had a bad weekend and lost two tires from the bead. I want to just go ahead and swap my dual rear wheel hubs on the front and run spacers on the rear for now. So it sounds like 2" inch us what I need
I'm running a dually d70hd in the rear BUT it has been narrowed to srw 14 bolt width (previous project).
2Many, I have a set of 1.5" spacers in the shed, if you wanna try them.
2many
Registered Member
Oh I see. I've been through your build thread but didn't catch that. I've had alot of help from BOZ42. Nice guy and lives about 300yards from me. My 70hd us dually also but it's my understanding swapping the single 14bolt hubs on gets me the correct spacing. Just not done building my rear yet.
2many
Registered Member
And their he is. Ya I hope to get the front swapped this week. With the wheels mounted. I'll get wih ya thanks
