ChassisUnlimited
1/2 ton status
We are Proud to Introduce our Chassis Unlimited Line of CNC Machined Dana 60 Steering Arm Kits.
These Arms are IN-STOCK For Same/Next Day Shipment At all Times!
Our Arms are made 100% In House on our CNC Milling Machines, And are Manufactured with USA Materials, In Livermore California. This Allows us to Strictly control quality and Fitment, as Well as allow us to offer our Lifetime Replacement Guarantee.
Features Include-
-Spring Less Design Dana 60 Steering Arms
-CNC machined from 1018 cold rolled steel
-10 degree Tie-rod end angle correction
-Tapered for the 7/8" Chevy 3/4 ton Tie Rod Ends or can be drilled out for 3/4 hiem joint
-Media Tumbled for Superior Finish
-Machined with 5th hole for Reid Racing knuckles( If you Do Not Have 5Th Stud hole, You May Run With out It)
Our Steering Kit's Include-
-2 Adjusting screws and jam nuts
-2 Springless adjusting washers
-2 nylon bushings
-2 Zinc plated zerk fittings
-ARP Mounting Studs/hardware (10 ARP 1/2" fine thread studs and tapered nuts)(Includes Hardware for 5th Stud)
We Offer These Kits in 3 Different Configurations-
-Short Arm Kit(Single Hole Both Sides) - $249.99
-Short/Long Kit(Used for Cross Over Steering W/High steer, Single Arm and A Double)- $259.99
-Long Arm Kit(Both arms Have Double Holes) - $269.99
-Drill Holes Out to 3/4 For Hiem Joints- $15
-Tie Rod/Drag Link Kit(Includes 4X ES2234 R/L, Jam Nuts, Tube Adapters, and 2X- 54" Lengths 1.5X.250 DOM Tube)-$209.99
All Prices are Plus Shipping, However, These Kits Will Fit in a Flat Rate Boxes, Or we Ship UPS!
You Can Purchase these Arm Kits Directly on our Web Site Here-
https://www.chassisunlimited.com/product/steering/d60-steering-arm-kits.html
Call Chassis Unlimited @ 888-552-5371 For Phone Orders
PM Me, Or Email [email protected]
Dont Forget to Follow Us on FaceBook For Updates and Specials- HERE
These Arms are IN-STOCK For Same/Next Day Shipment At all Times!
Our Arms are made 100% In House on our CNC Milling Machines, And are Manufactured with USA Materials, In Livermore California. This Allows us to Strictly control quality and Fitment, as Well as allow us to offer our Lifetime Replacement Guarantee.
Features Include-
-Spring Less Design Dana 60 Steering Arms
-CNC machined from 1018 cold rolled steel
-10 degree Tie-rod end angle correction
-Tapered for the 7/8" Chevy 3/4 ton Tie Rod Ends or can be drilled out for 3/4 hiem joint
-Media Tumbled for Superior Finish
-Machined with 5th hole for Reid Racing knuckles( If you Do Not Have 5Th Stud hole, You May Run With out It)
Our Steering Kit's Include-
-2 Adjusting screws and jam nuts
-2 Springless adjusting washers
-2 nylon bushings
-2 Zinc plated zerk fittings
-ARP Mounting Studs/hardware (10 ARP 1/2" fine thread studs and tapered nuts)(Includes Hardware for 5th Stud)
We Offer These Kits in 3 Different Configurations-
-Short Arm Kit(Single Hole Both Sides) - $249.99
-Short/Long Kit(Used for Cross Over Steering W/High steer, Single Arm and A Double)- $259.99
-Long Arm Kit(Both arms Have Double Holes) - $269.99
-Drill Holes Out to 3/4 For Hiem Joints- $15
-Tie Rod/Drag Link Kit(Includes 4X ES2234 R/L, Jam Nuts, Tube Adapters, and 2X- 54" Lengths 1.5X.250 DOM Tube)-$209.99
All Prices are Plus Shipping, However, These Kits Will Fit in a Flat Rate Boxes, Or we Ship UPS!
You Can Purchase these Arm Kits Directly on our Web Site Here-
https://www.chassisunlimited.com/product/steering/d60-steering-arm-kits.html
Call Chassis Unlimited @ 888-552-5371 For Phone Orders
PM Me, Or Email [email protected]
Dont Forget to Follow Us on FaceBook For Updates and Specials- HERE
