Is this a steering box that can be used to set up cross over on my 88' blazer? http://dubuque.craigslist.org/pts/2169905102.html
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Steer box for crossover?
- Thread starter TREA18
- Start date
Yes. The ad says it came out of an 80's truck so that would make it an O-ring fitting box.
stumpbuster
1/2 ton status
very sweet!
gotta be excited bout goin xover
gotta be excited bout goin xover
What do you guys think of the price?
its cheaper than junkyard price here, but more than a core is worth.
73redblaze
1/2 ton status
how can you tell the diffrence between a 2wd and a 4wd box by looking at it? I have one laying around that i think is a 2wd but how can i be sure?
2WD boxes are splined all the way around, the 4WD ones are splined 1/3 of the way or so.
The 2WD sector shafts (the splined part that sticks out the bottom) are threaded at the bottom and use a nut to hold the pitman arm on.
The 4WD ones use a notch in the sector shaft and there is a bolt that clamps the pitman arm onto the sector shaft.
bought my rebuild for $100 at an automotive swap meet
it's all they do, rebuild OEM stuff
dunno if that's a good price, but it's something to consider when buying used, possible rebuilds
it's all they do, rebuild OEM stuff
dunno if that's a good price, but it's something to consider when buying used, possible rebuilds
