CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Steering and more from Ruffstuff!

Gravel Maker

1/2 ton status
Joined
Feb 6, 2006
Posts
2,634
Reaction score
50
Location
Sacramento, CA
This is kind of an offshoot from our DOM sales & its about time! We have taken way too long to bring these to market. The prices some companies charge are out of this world for these simple items so we are going to serve them notice right here!

Steering components from Ruffstuff Specialties using our own Heat & Cryo Treated Chromoly Heims or GM 1 Ton Tie Rod Ends.

I priced these out using a fair pricing model we have developed (we do have to make money or we won't be around long) but after I was done I compared our prices to several other companies and was sure I had made a misstake! Our pices couldn't be that much lower than theirs could it? I did my pricing again & again, always with the same result. Okay, our pricing is simply more fair I guess ;)

Y Link steering
ylink.jpg


We have also uncovered some interesting Tie Rod Ends for those of you having problems with Diff Cover clearance, pretty damned cool with the same strength specs of a standard GM 1 Ton TRE...

Offset TRE Kit
Offset%20tie%20rod.jpg


They are available alone or as a kit
offset%20tres.jpg


All of our kits using Heims also use our unique Safety Misalignment & Hex Bungs
saftey%20mis%20w%20tube%20n%20bung.jpg


All of our kits give you choices that can save you money, be stronger, and be more versatile. Look closely through the selections and make your decisions carefully. Keep in mind DOT regulations about Heims in steering. Heims are not legal in any state for highway use when used in steering. They may perform better but are not DOT approved, use your judgement...

These hae been on our site for about a month and it really seems you like them with 6-8 sets shipping daily :)
 
Very nice steering kit. I will defiantly be purchasing some of your products when I pull my project in the shop this summer. But I do have a few questions about this kit for now.

Do you have any info on min lift requirements for this set up. or a picture of it installed.
I have a vehicle that needs some steering help and would like this upgrade over stock.

And about your prices, they do seem very fair for what the customer would get, keep up the good work.
 
There is no conflict on the arms with a Y link steering setup or a standard crossover for that matter so lift would not really come into it because yo would not go to the expence without at least larger tires...

Thanks about the prices, we try!
 
If these were all classed as one product they would be our single best selling poduct! Thank you all for your trust and orders :)
 
We dont sell the arms, however we do have complete steering kits with tie rods, drag links etc!!! Check out our website.
 

Latest Posts

Top Bottom