CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Steering block
- Thread starter Dabbas
- Start date
When you say block, do you mean to raise the steering arm on the knuckle or do you mean the steering arm for cross over?No one?
skip the block thay SUCK 
had one and removed it and went drop pitman arm off box.
had one and removed it and went drop pitman arm off box.
skip the block thay SUCK
Unless he's like my cousin @ 7" lift with a block AND drop pitman arm
I've heard of but never used the steering block. I ran an 'S' drag link for years with normal push-pull problems. X-over is really the only way to go.
skip the block thay SUCK
Can u give me a link of the best pitman arm for 4" lift kit? Cuz im confused about many dimensions there for it! :s
buffblazer
1/2 ton status
I can try and get you some specs this afternoon. My D60 has a block on it.
Thank u very much!
there are a lot of available pitman arms, but I'm almost positive they only go down 2" at the most. The block will net you 4" IIRC. I would do both of those before running an "S" arm draglink. IMO only
i run drop pitman arm with 4" lift on k30 with no problems.
block i had was new and wouldnt stay tight.
more than 4" go crossover also.
and here is pitman arm. http://www.summitracing.com/parts/SJA-CA50/
block i had was new and wouldnt stay tight.
more than 4" go crossover also.
and here is pitman arm. http://www.summitracing.com/parts/SJA-CA50/
