stephan.laun
1/2 ton status
I am installing a 4 inch lift and need to remove the steering arm off the axle. Whats the best way to dothis. I have smacked on it with a BFH but it wont budge what am I doing wrong.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Steering help
- Thread starter stephan.laun
- Start date
THISISWEIRD
1/2 ton status
Everyone talked about how difficult this is....and I imagine how it could be. But....
Last weekend I replaced a dropped pitman arm (worn out) with a standard pitman arm and a raised steering arm. I took off the nuts, tapped it one time with a nail hammer, pulled out the cone washers, tapped it again and pulled it off. Easy as pie. I guess even a blind squirrel finds a nut now and then.
Last weekend I replaced a dropped pitman arm (worn out) with a standard pitman arm and a raised steering arm. I took off the nuts, tapped it one time with a nail hammer, pulled out the cone washers, tapped it again and pulled it off. Easy as pie. I guess even a blind squirrel finds a nut now and then.
Mudstud
1/2 ton status
You are hitting it UP. Don't do that. Hit it down.- yes down.
stephan.laun
1/2 ton status
OK thanx did it and came off with no problem.....
