Stock H1's on 14 bolt w/spacer - Pic please

[reddog64]

OK
I'm looking for a picture of some stock back spacing ( 7 inches ) H1 hummer wheels on a 14 bolt...

I's sure i'm gonna need some wheel spacers... bu tnight end up having to just have them recentered...

Anyone got a picture?

Where can i get a spacer?
Front dana 60 is a DRW... no spacer needed...

 

[obijuan]

muddybuddy posted a pic not too long ago of his truck with a 2 inch spacer on his 14 bolt and the hub was barely sticking out.

offroadoverstock.com or somethng to that extent has the spacers for cheap.

 

[nvrenuf]

Check this - http://coloradok5.com/forums/showthread.php?t=179950&highlight=wheel+spacers

Iirc, his spacers are 3 1/8" thick. I also have the same size spacers, mine are from a dually conversion company named Arrow Craft I believe.

 

[reddog64]

I can have them recentered... but i'd like ot keep them stock at the 7 inch b/s

Found em local too for 40 bucks (the wheels)

I'd think the 14 bolt is strong enough to handle the added stress of a 2 or so inch spacer right?
If i go with a 2 inch spacer, it's like having 5 inches of back spacing, kinda... right?
Think a 2.5 is safe?
How big do you think is safe for daily driving?

 

[reddog64]

any guess how thick they need to be to make up for the front DRW?

 

[BKinzey]

The 2" spacer is the width most go with.

Which rims did you find for $40? If it's the 8 bolt that's a decent price. If they are the 12 bolt that's a fantastic price. Even better if they come with the run-flats.

 

[reddog64]

I'm gonna swap my srw hubs onto my drw 14 bolt (for the 4.56 gears) so if i add a 2 inch spacer it should be close...

Sound good?

 

[muddybuddy]

i run 14b with 2.5" spacers in rear and 2" up front with stock h1 rims

 

[reddog64]

Thank You!

Any problems with them coming loose?
Issues off road?

I'll look for some 2.5 inch spacers for the rear

 

[muddybuddy]

Thank You!

Any problems with them coming loose?
Issues off road?

I'll look for some 2.5 inch spacers for the rear

nothing yet, just make sure they are torqued to spec's and you should be good

 

[readymix]

Here are a few shots of mine.
2" spacers all the way around.

 

[reddog64]

thanks