today my hubs were stuck in the locked position i thought...come to be i had to put the tranfer case in neutral cut the truck off then put it in 2wd and then it was unlocked...anyone elce have this problem???
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
stuck in 4wd
- Thread starter twoslo4five0
- Start date
resurrected_jimmy
1/2 ton status
happens sometimes.... its just tension on the shafts that wouldn't release until you diconnected the T-case
Goose
1/2 ton status
Yup, sometimes you can back up a short distance turning wheels back and forth some to release the driveline tension.
good to know thanks guys..prolly haveing a locked front end doesnt help a whole lot with that either...
resurrected_jimmy
1/2 ton status
twoslo4five0 said:
that will certainly add to the binding in the front end
Thunder
3/4 ton status
Yeah with a locker in the front I make it a habit to always back up before I take It out of 4x4. It saves getting back in and backing up if the hubs wont disenguage or having a hard time getting the xfer case out of 4L
or do what I do and never take it out of 4 low. 
