lunchbox
1/2 ton status
im trying to install a throttle body spacer (easy right?) i cant seem to find the fuse for the fuel pump can sombody tell me where it is?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
stupid question
- Thread starter lunchbox
- Start date
1985_K5_Silverado
1/2 ton status
Any particular year, make and model of vehicle?lunchbox said:
Do you need the additional height of the spacer for linkage clearance (oddball custom induction setups make it a necessity on occasion), or just to take advantage of amazing increases in both fuel economy and power, all at an unbelieveably low price for the promised benefits?
3rdshiftdesign
1/2 ton status
1985_K5_Silverado said:
Wow, they really give you that much of a fuel increase and power, for so cheap?
lunchbox
1/2 ton status
its an 87 tbi 305
Why would you need to find the fuel pump fuse?
Leaving the key off should be sufficient. Unless you need to bleed off pressure, which there isnt much, just slowly open the lines. Or disconnect the fuel pump relay on the passenger side firewall and crank it over.
Leaving the key off should be sufficient. Unless you need to bleed off pressure, which there isnt much, just slowly open the lines. Or disconnect the fuel pump relay on the passenger side firewall and crank it over.
dave_90_blazer
1/2 ton status
the TBI trucks bleed the pressure off on their own, just crack the lines, shouldn't spray
