Suspension Basics

[4X4HIGH]

Is this the bracket you would recommend? Paired Shock Bracket 1.75"Tube
[SH3]$14.00

Click to enlarge
Click to enlargeThis is the same Tab as ST3, cut to fit 1.75" tube (easily modified for 1.5 or 2.0), and joined by a bridge to make a bracket, the bridge between tabs also makes the combination more than twice as strong as when used individually. And it saves 15 minutes over single tabs every time. Made for use on Shock hoops, tube buggy chassis,ect... If you are a shop, you need every time saver you can get to decrease work backlog and keep making money, and so much better when it is stronger too. These make tab placement accurate, easy, and fast, period. .25" (1/4) HRP&O Steel, sold in pairs.

 

[Gravel Maker]

Maybe I missunderstood you.....

Those are designed mostly for shock hoops but if you are mounting laterally they will work well, this is the one I thought you were talking about....

These are radious for the axle along the length.....

 

[4X4HIGH]

I'm not seeing a radius on those brackets. I am mounting my lower shocks in the factory orientation and want the least amount of work in doing so.

 

[Gravel Maker]

with the factory orientation.....

the first one would be the best choice.

We are working on a stronger than stock, stock style mount, should have it in about 3 weeks. Time is a commodity!

 

[Gravel Maker]

Working on Suspension Basics III


Give me a few days, going to highlite a couple of new things and a couple of staples......And those of you with shops remember, we wholesale too!

 

[Gravel Maker]

Time for an update.....

This is good stuff!