Slickburban
1/2 ton status
Can any body give me a parts list as to what i would need for a swing out spare tire holder also can i weld it to a chrome bumper? I guess my main question is for the actual swing out piece or pieces.thanks
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Swing out bumper
- Thread starter Slickburban
- Start date
EXJAY
1/2 ton status
Might be wrong but not sure if the stock bumper could handle that expecially if you run a large tire and want the same for a spare.
I wouldn't even waste my time on messing with a stock bumper...
There is a lot of stress at the swing out point.
This is what id use
http://diy4x.com/cart/index.php?route=product/product&path=39&product_id=166
There is a lot of stress at the swing out point.
This is what id use
http://diy4x.com/cart/index.php?route=product/product&path=39&product_id=166
Slickburban
1/2 ton status
Well i think its stock size 15" but yeah i dont think what goes on in my brain is gonna work.
Slickburban
1/2 ton status
Damn just goes to show how clueless i am i was just on this site a few days ago and didnt even pay no mind to it but thanks i was wondering what everyone else was using.
EXJAY
1/2 ton status
You could possibly fab something that comes off the bumper mount directly as the main support. If your looking at carring something bigger than a 31" I'd look a an aftermarket carrier rated for the proper weight. The last thing you would want is your tire to go missing down the freeway or break off while on the trail. Im still trying to find a factory inside mount for mine.
