Tailgate Hinges

[‘89Jimmy]

Howdy!
I'm attempting to disassemble the tailgate hinges and replace the bushings. For whatever the reason, the pins just refuse to come out. I can't find a c-clip or anything else that would appear to block it from coming out. Anyone know the secret handshake?

 

[imiceman44]

Howdy!
I'm attempting to disassemble the tailgate hinges and replace the bushings. For whatever the reason, the pins just refuse to come out. I can't find a c-clip or anything else that would appear to block it from coming out. Anyone know the secret handshake?
View attachment 528281View attachment 528282View attachment 528283

I am pretty sure they are a press fit one the outer

 

[tarussell]

I am pretty sure they are a press fit one the outer

And stamped once assembled to get that retaining bulge on the pin so no hardware is needed.
I don’t think there are bushings in those hinges - just lube with penetrating liquid occasionally.

 

[‘89Jimmy]

Interesting. I assumed they were serviceable since we can buy pins and bushings from LMC

 

[Blue85]

The pictures make it look like there's something in there. I've never tried to take one apart.

Maybe the LMC site is just screwed up listing front door hinge pins on the tailgate page? I mean, as pictured (#26), would mean the inner hinge ID is much smaller than on the outer hinge and I don't think anybody has evidence for that.

 

[Blue85]

That also leads to the next question. Why do you want to replace those parts? What's the problem? Usually the back of the truck rusts off and the hinges are no longer attached before those hinge pins become a problem.

 

[‘89Jimmy]

Fair points. I was taking them apart because one side has a fair bit of slop, and it wasn’t latching quite right. I can adjust the strikers, but thought I’d check the whole thing out.