thedrip
1/2 ton status
Solid cast steel blocks, 3.5" at the rear of the block, 3" at the front. Made the 12bolt on my th350/np203 k5 point right at the tcase output with stock springs. Also ubolts to match. All from AZ truck, minimal rust. I took them off without even having to use WD40, so they can't be all that bad.
$15+shipping for the blocks/ubolts (and hardware), or if you want to pick them up, a case of beer will cover the tab pretty nicely.
Located in east Mesa, AZ
$15+shipping for the blocks/ubolts (and hardware), or if you want to pick them up, a case of beer will cover the tab pretty nicely.
Located in east Mesa, AZ
