lak2004
1/2 ton status
I am looking for the feed and return lines that screw into the back of the tbi throttle body.
Thanks
Thanks
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
tbi feed/return lines-FOUND them
- Thread starter lak2004
- Start date
shaun89
1/2 ton status
i think i have a set! i will check and get back to you.
I have a set of new ones. They cost me about 42.00 each. You can still buy them from the dealer. Or make an offer on mine.
lak2004
1/2 ton status
Cool let me know.
Yea I know the dealer has them but I dont want to spend quite that much on them, if I went that route I would just go to -AN fittings instead. I'll keep your offer in mind though. Thanks
lak2004
1/2 ton status
ttt
Jason4x4
1/2 ton status
just an FYI, if you get a set off of a TBi caprice, they wrap around to the front of the motor where the factory fuel lines for the mechanical pump are, I am gonna use those, it'll make things alot easier.
Jason4x4
1/2 ton status
these...
Jason4x4
1/2 ton status
as long as you don't have an airpump, if you use an airpump, it needs to be serp belt.
lak2004
1/2 ton status
Nice that is really good to know. Thanks! Ill check on ebay for em.
74kay5
1/2 ton status
have a set of lines removed from my 91 if you want them.
lak2004
1/2 ton status
top still need these
74kay5
1/2 ton status
Still have a set for you, 85 shipped
lak2004
1/2 ton status
trying to find them for a little cheaper than that. very broke right now. but if i cant find anything cheaper ill let you know. thanks
How soon do you need them? I have a pair but they are buried in my junk box which has my trans and doubler on top of it. These are a good used set (at least they were when i put them away). PM me an offer and when i get a chance i'll dig them out.
74kay5
1/2 ton status
Well...they are actually on ebay right now with 2 hours and 40 min left so if you find this in time you might be able to win them for cheap.
http://cgi.ebay.com/ebaymotors/OEM-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Those aren't even the lines he's looking for. The ones he wants are the braided flex lines that go from the TBI unit to the lines you're selling.
IIRC these braided lines are only about 2 foot long or less.
IIRC these braided lines are only about 2 foot long or less.
lak2004
1/2 ton status
correct. I dont even really need the whole line if it is hard to ship. I can just double flare them and put tube to my existing lines.
Jason4x4
1/2 ton status
I've got them, 1 of the braided steel is bad, so you would have to cut and flare. From tbi down back of engine.
I wound up useing those caprice tbi lines I was telling you about.
I wound up useing those caprice tbi lines I was telling you about.
lak2004
1/2 ton status
whatcha want for them? pm me if you would like thanks
Guess i'll wait to dig the lines out until you make up your mind as to who you're going to finally get them from. 
