badmix
1/2 ton status
As some may remember I was having issue with my torque convertor not locking up at hi-way speeds. Well, I replaced the vacuum switch on the firewall and the CC/TCC cancel switch under the dash.
This seems to have fixed it. Ive installed a small LED light wired into the harness going to the Torque convertor, its amazing how much activity there is with the light going on and off all the time.
It seems to be locking up pretty good, even at slower speeds. Seems like it is trying to lock as quick as it can, guess thats a good thing. lol.
Anyways, cost me about 60bux more or less, pretty cheap fix if you ask me.
Thought id share.
This seems to have fixed it. Ive installed a small LED light wired into the harness going to the Torque convertor, its amazing how much activity there is with the light going on and off all the time.
It seems to be locking up pretty good, even at slower speeds. Seems like it is trying to lock as quick as it can, guess thats a good thing. lol.
Anyways, cost me about 60bux more or less, pretty cheap fix if you ask me.
Thought id share.
