th400 4x4

[jagermiester]

I need a th400. 4x4 that was attached to a 208 or 241. I believe I can also use one from a 205 but not sure. PLease let me know what you have as my friend snapped my bellhousing in half and that is all I need to finish the truck

 

[thatK30guy]

Yes, you can use a 400 that was in front of a 205 from the 1 tons between the years of '85 to '90. They have the same output shaft length.

 

[imiceman44]

I need a th400. 4x4 that was attached to a 208 or 241. I believe I can also use one from a 205 but not sure. PLease let me know what you have as my friend snapped my bellhousing in half and that is all I need to finish the truck

I have 2 options for you:
I have the th400 you want for $200 plus shipping.
Also if your tranny is still good and the case is not broken beyond the bellhousing, I have a new replacement bell I bought last month $250 shipped.
I can wait if you need it now, I can buy one later or you can order one yourself, I don't know how long for the new batch to come out.
That bell is certified as a scattershield for NHRA racing, it bolts to your pump and eliminates the week bellhousing section.
Where in NV are you?
If you are around reno? if you are I can meet you half way and you can look at both and decide

 

[jagermiester]

I am interested in the whole 400. Is it good? Mine is good it just snapped off the bell housing about 5 " back from the edge.

 

[imiceman44]

I am interested in the whole 400. Is it good? Mine is good it just snapped off the bell housing about 5 " back from the edge.

OK do you want to come down this way?
I could meet you somewhere and shorten your trip but not too far.
Or you could just come to me in Lincoln CA.