CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

That's a wrap- The OFFICIAL 2009 Rigs of CK5 Calendar pic submission thread

Can Can

Pusher Man
Joined
Feb 17, 2000
Posts
16,432
Reaction score
2,735
Location
Cochrane, Alberta, Canada
EDIT:

Guys, I've already been sent a bunch of really good pics, but I'm hoping some of you are planning on submitting some of the awesome action shots I know you have sitting on your camera or hard drive. Be sure to send your pics to:

unan at telus dot net

Okay, lads, it's that time again. Kim and I are officially accepting pics for consideration for the 2009 Rigs of CK5 calendar. Here are the rules:

First and foremost, we need an amazing picture to grace this year's cover. Does your pic cut the mustard???? Only the very best pictures will be considered........:thinking: :thinking:

1. You must be a paying member in good standing.

2. Pics need to be HI-RES, with a minimum resolution of 1200x1600 pixels. Whenever possible, try to submit pics taken "long side down" so we can maximize page usage. Grainy or out-of-focus pics will not be accepted.

3. Along with your pic, I'll need a short list of your truck's specs, in this order:

Year, make and model, motor, tranny, TC, front and rear axles, gears, lift size and brand, tire size and brand, wheel size and brand(if applicable), any "extras" that you think set your truck apart from others.

As well, please include the location where the pic was taken.

4. We are looking for cool action shots with awesome background scenery. Poser shots will be considered if the background is too good to ignore. If you've purchased a calendar in the past, you know what we're looking for. Keep in mind that this is not a beauty contest- I look forward to receiving pics of ALL KINDS OF RIGS, not just modded-out monsters. In fact, last year, as usual, we were short on submissions by Sub and 1st Gen owners.

5. We will be accepting submissions until SEPT. 30th, and although this is not first-come, first served, I would appreciate it if you guys could send your stuff into me sooner than later. We have 12 spots to fill, including the cover page, and I intend to include a few honorable mentions on the back page this year......


6. We have reserved the month of August as a tribute for Jason Payne(willyswanter). It's the least we can do..........:frown1:

Anyhow, you can submit your pics to unan at telus dot net. Please include your username AND real name, and mention something about "CK5 calendars" in the title.

That's about all I can think of. Like I said before, many of you have bought these calendars in the past, and know what kind of pic is calendar-worthy. So when you head out on the trails this summer, be sure to keep your cameras handy- the next pic you take might appear in next year's Rigs of CK5 calendar!!!! :thumb:

Good luck, lads.......
 
Last edited:
I might as well give it try.
1974 blazer.
Motor-496ci BBC.
Transmission-TH400 with a reverse manual valve body.
Transfercase-NP 205 twin stick.
Axles-14bsf with a Easton posi in the rear, Dana 44 with a trac-loc in the front.
Gears-3.73
Suspension-DIYS4x B-52 in the front, Mc Coy liftspring in the rear with Cal-trac bars.
Tires-Old school 33x16.5x15r Dick Cepek Fun Countrys on 15x10 slot mags.
Location-Oceano Dunes' Comp hill Memorial Day weekend.
BTW, that is my nephew driving. I took the picture.

Blazer_4.jpg


Blazer_5.jpg
 
Last edited:
I'll give it a go.

Not sure what to do with the email address of unan at telus dot net

1972 GMC Jimmy
350 Chevy Camaro 1979 - 202 Heads - torquer intake - Eldelbrock Q-Jet
Trans - SM465
TCase - NP 205 twin stick

3/4 ton converted D44 (currently open)
1 Ton 14 Bolt with Detroit locker 4:56's

Skyjacker 8 inch lift / ORD Shackle reversal / DIY4X hangers

37" Iroks on M/T Classic II's

Jon boat sliders - Soon to beinstalled DIY4X engine crossmember

ElDorado Canyon - Dayton side - Nevada (of course!)

100_1613.jpg

100_1657.jpg
 
Not sure what to do with the email address of unan at telus dot net

Type it as you read it aloud, it'll make sense. :wink1:

Edit: Remember the pics need to be big, high resolution stuff so they will retain their quality when blown up. :deal:
 
1990, Chevrolet K5 Blazer, 5.7liter TBI V8, 700R4, NP241 SYE, 10 bolts front and rear BTF diff cover, 4” procomp lift (no blocks) w/ ORD 1”zerorate add a leaf, 33X12.50R15 BFG A/T, 15X10 MB motoring, ORD Swaybar disconnection/correction kit, ORD Weld on steering box repair kit, Bolt on steering box brace kit, Durabak'd Rockerpannels, Blazen offroad rocksliders & HD rear bumper, Custom chrome dipped front winch bumper W/milemarker 9500 &synthetic rope, KC’s on the front. Six rocklights light up the underbelly!




1st pic: Moab Utah, Moab Rim, Z Turn
2Nd Pic: Moab Utah, Gold bar Rim, Golden Crack
3rd Pic: Moab Utah, Poison Spider Mesa

IMGP0071.JPG

BLAZER BASH 2007 241.jpg

BLAZER BASH 2007 147.jpg
 
Last edited by a moderator:
Its an Email address written in the secret CK5 code. Not a www. web site.

at= @ Dot= .

Can Can will prolly kill me, or at worst a severe banning. For revealing such highly classified info.
:doah:
Well I ended up sending Can Can two e-mails.
 
I don't know if this is too much of a poser or if you take stock vehicles.. but this is the best pic i have of mine, thought i'd give it a try.. it has 33s now though, i spose i could go out and take newer pics. this one is from last year:

1990 Blazer 1500
350TBI with mild comp cam
700R4
NP241
Corporate 10-bolts w/ posi rear
3:42 gears
Stock suspension (for now)
31 X 10.50 Goodyear wranglers on stock 15 x 7 aluminum rims (now has 33" Khumos)
Location: random canola field in Saskatchewan, Canada.

truck (9).jpg
 
Here is my submission. Taken 6/1/08

1989 Chevy Blazer
355 TBI full roller
700R4 built
NP241 with SYE
D60 front with Detroit locker and crossover steering and hydro assist
14FF rear with detroit locker and disk brakes
4.56 gears
6" front Superlift HD springs
4" rear Superlift springs, 4" ORD shackle flip
315/75/16 BFG MT's
16x8 Eagle Alloys
OBA, custom built rear bumper, rear CV driveshaft, XD9000 Warn winch

Sawmill Mountian Area (Yosemite National Forest)

008.JPG
 
Last edited:
Going to the dunes next weekend... I'll take mom's good camera and get some action shots of the k10 tearin' it up :)
 
1971 Chevy k5 Blazer
sb327, th350, np205
dana44, GM 12 bolt, 3.07 gears
4" ORD shackle flip with Tuff Country EZ ride springs
Procomp 33x12.5x15
ORD crossover steering
STC softtop

Picture taken in Moab, Utah.

BB06 024_small.jpg
 



the ride Ramjet 350 th400 203ORD205 dana 60 14bolt detrot lockers and 42 tsl on beadlock rims

i hope you can do 4 on a page i think this would be cool

place RC offroad park / trail-shot the moon
 

Latest Posts

Top Bottom