Those with ONLY 4" of lift, what size tire you running???

[FreedomIsntFree]

Thanks guys...I think the Blazer is going to end up with a 5/6 lift.

I am going to use zero rates up front so I can move the axle forward.

Then in the rear, I'm going to have to add 2 inches to get rid of the Blazer sag. Plus I need that extra 1/2" on top of that to get rid of the lean on the drivers side. Thanks all...

 

[BadDog]

Just for fun, thought I would jump in...

4" lift with 42" TSLs.

Took a "few" mods to make it work though...

 

[clarkjw24]

42s with 6"+2" body and lots of fender triming. But I'd like to take it down about 2". Which I may do this winter, installing some 63"s and 52"s.

 

[TruckNutzDude]

I'm currently running 44's on a 6"/8" lift. Got a set of zero rates for the front to move the axle a little foreward and bring it up an inch. I rub the firewall, core support, steering box and a few other things when I flex, but good bump stops help keep it to a minimum. I'd go lower but I'm not into modifying my floor since the part my tires rub is the only part of my blazer that hasn't been eaten by cancer (rust)...

 

[mudhog]

im running a 2.5in lift with 39.5x13x16in iroks and have no problems

 

[FreedomIsntFree]

From all the replies I think I will be fine with my 5" in front and 6" in back with 37" SSR's. My ultimate plans are for 38.5 Boggers, but I just got a steal on some black rock crawlers and 37" SSRs. So that's what I'll be running for now. Thanks ya'll.

 

[dleroy43]

5" and 37s

 

[Leper]

im running a 2.5in lift with 39.5x13x16in iroks and have no problems

Oh yea!?!? I'm running 44's and have lowered my Blazer 12 " and have no problems.......except for reality

 

[mikey_d05]

Oh yea!?!? I'm running 44's and have lowered my Blazer 12 " and have no problems.......except for reality

He's not joking.