jackedjimmy
1/2 ton status
Iam about to asseble my engine and tranns and lower it onto the frame of my 81 jimmy. There are a few torque specs that i need to know and that i couldn't find after looking in my chilton's manual.
It's and 89' SBC going in a 81'jimmy with a th350 and np205 combo that i dont know th year.
these are the things that i have found:
.engine to flexplate bolts= 75 ft/lbs
.bell housing bolts= 34 ft/lbs
.torque converter to flexplate bolts= 50 ft/lbs
Things i need to know:
.Motor mount to engine block spec
.2nd piece of motor mount to frame spec
.all spring bushing (greesable) spec
.ORD steering box brace spec
.tranny to t-case spec
These are things i couldn't fnd in my crappy chilton's book.
I don't see why they dont just have a table of specs that covers everything!!!
Any information greatly apreciated.
It's and 89' SBC going in a 81'jimmy with a th350 and np205 combo that i dont know th year.
these are the things that i have found:
.engine to flexplate bolts= 75 ft/lbs
.bell housing bolts= 34 ft/lbs
.torque converter to flexplate bolts= 50 ft/lbs
Things i need to know:
.Motor mount to engine block spec
.2nd piece of motor mount to frame spec
.all spring bushing (greesable) spec
.ORD steering box brace spec
.tranny to t-case spec
These are things i couldn't fnd in my crappy chilton's book.
I don't see why they dont just have a table of specs that covers everything!!!
Any information greatly apreciated.
