Torque Spec for outer spindle nut?

[Never Satisfied]

Anyone know the torque spec for the outer spindle nut on the 10-bolt axle?

 

[readymix]

I'll have to look for the exact number but it is between 100 and 150 ft/lbs iirc.

 

[readymix]

Install the outer locknut and torque to a minimum of 80 ft. lbs. (108 Nm) on 1980 models, 160-205 ft. lbs. (216-277 Nm) on 1981 and later 1/2 and 3/4 ton models, and 65 ft. lbs. (88 Nm) on 1 ton vehicles. There should be 0.001-0.010 in. bearing end-play. This can be measured with a dial indicator.

 

[Never Satisfied]

Awesome, thanks!