Trans/cases /and adapters

[1-tonmudder]

I have the following parts for sale

Np 205 for Th350(no adapter) $200.00

2 DM Np 205's pass drop $250.00

Chevy SM 465/NP 203 adapter $200.00

Chevy TH400/NP 203 adapter $100.00

Chevy TH400 and NP203 complete $450

Chevy NP203 for SM 465 with adapter $350.00

2 new old stock Dana 70 centersections,never had tubes pressed in $100.00 ea

2 set's of new old stock Dana 70 5:86 gears $100.00 ea

Chevy Dana 44 8 lug hubs with driveflanges for small bearing Dana 44 $100.00

Various Dana 60 front axle shafts(no 78-79 Ford) $100.00 per side for inner outter

Gas tanks for 87 Chevy truck with EFI(pump in tank) $50.ea

Bare Chevy NP 205 cases for Th350 or SM465 $20 ea

4-36-12.50-16.5 Goodyear wranglers,round,hold air,some tread.For spares $25.00 ea

Chevy 6 lug 10 bolt front 4:10 gear complete $350





Parts are located in Greeneville TN and can be picked up there or will ship on your dime.

 

[Wicked Wolf Auto]

I have the following parts for sale

NP 205 for Th350,complete with adapter,sleeve,shifter $350.00

Np 205 for Th350(no adapter) $200.00

2 DM Np 205's pass drop $250.00

Chevy SM 465/NP 203 adapter $200.00

Chevy TH400/NP 203 adapter $100.00

Chevy TH400 and NP203 complete $450

Chevy NP203 for SM 465 with adapter $350.00

Chevy SM 465/205 combo complete $450.00

Parts are located in Greeneville TN and can be picked up there or will ship on your dime.

I'm not the price police by any means but WOW

 

[kennyw]

I'm not the price police by any means but WOW

Most of those prices are resonable for what he has. I've sold similar parts for similiar prices... but in the end, the value is what a seller is willing to sell for and a buyer is willing to pay.

 

[1-tonmudder]

Thank youuuuu brother.I typically dont respond to statements about my prices,because in the end it is up to each individual the value of an item.I am asking what the market value(typically) is.There is a chance that anyone can get lucky and find any of this stuff for cheaper.Most people that complain about my prices would be asking the same or similiar if they had these parts.

I dont take it personal.

 

[thebigdaddyof2]

I'm not the price police by any means but WOW

Generally, we don't make comments about a seller's price around here....

Post up if you're interested.
Keep quiet if you're not.

 

[1-tonmudder]

Everybody has a right to voice their opinion and Im cool with that.

 

[Wicked Wolf Auto]

Sorry if I came accross as a D!ck I apologize!

 

[ryan22re]

Chevy SM 465/205 combo complete $450.00

Parts are located in Greeneville TN and can be picked up there or will ship on your dime.

what is the bolt pattern on that 205? I would be interested if it were later model 32 spline/ 6 bolt round pattern.

 

[1-tonmudder]

It's the old figure 8 style

 

[1-tonmudder]

updated list

 

[SUBFAN]

Got pics and numbers off the D70 5.86 gears?

 

[thatK30guy]

Got pics of the Dana 70 center sections? And what size tubes do they require to be pressed in them?

 

[1-tonmudder]

Got pics and numbers off the D70 5.86 gears?

The pinions are 29 spline with a part # of 40960.The ring gear # is 34812 and also has this # B8AE23 tooth count is 41-7 and was produced 11-20-84.I can get some pics if still interested.The gears are still coated in cosmoline.

Got pics of the Dana 70 center sections? And what size tubes do they require to be pressed in them?

Yeah right here.

and here


The tube size is 3-3/4 if I remember right.it is shown with the pinion and yoke,but they have been removed.If you are still interested I will get a true measurement on the tubes.

 

[thatK30guy]

Yeah right here.

and here


The tube size is 3-3/4 if I remember right.it is shown with the pinion and yoke,but they have been removed.If you are still interested I will get a true measurement on the tubes.

I'm interested. Do you know which series of D70 these are from? Are they the D70HD? D70U? Etc.? Should be a cast number on them somewhere to list which size they are.

 

[1-tonmudder]

They are B series as far as I can tell.There is a B cast in the top of the housing.

 

[nvrenuf]

Chevy SM 465/NP 203 adapter $200.00

I'm interested in this but unfortunately I'm broke at the moment... Would you be interested in any thing in trade?

 

[1-tonmudder]

Really all Im needing right now is a figure 8 style TH400 adapter??

 

[nvrenuf]

Really all Im needing right now is a figure 8 style TH400 adapter??

Wanna trade? I'll pay my freight and you pay yours?

Mine is crack-free and all holes have good theads, yours ok?

 

[1-tonmudder]

Yeah Ill trade and it is in good shape,got any pics.I thought I had some of mine,but cant seem to find them.Ill get some more in the morning.

 

[nvrenuf]

Sounds good, gimme your email and I'll send you pics tonight.