Transfer case rebuild kits

[85 Jimmy]

Where is a good place to get a rebuild kit for a NP205 and preferably the front half of a NP203?
I don't know if anything was wrong with either one. I got the 203 out of a junkyard and the back half was all messed up, it was just laying on the ground so I decided that since the hard work of getting it out was done I'd go ahead and get it. I got the 205 off a member on here, I think Odin. I tore both apart awhile back and didn't notice anything out of the ordinary, so I guess I just need to reseal and put in new bearings.

 

[Kain]

on this page below scroll down

http://www.offroaddesign.com/catalog/transfercaseparts.htm

 

[digitalepiphany]

Check out this link. You'll have to choose your transmission first, and then go from there.
http://www.monstertrans.com/store/categories/Torque-Converters/GM-Chevrolet/

Also, this one:
http://www.monstertrans.com/store/categories/Torque-Converters/GM-Chevrolet/

 

[dremu]

Check out this link. You'll have to choose your transmission first, and then go from there.
http://www.monstertrans.com/store/categories/Torque-Converters/GM-Chevrolet/

Also, this one:
http://www.monstertrans.com/store/categories/Torque-Converters/GM-Chevrolet/

Both links are the same. Think you meant

http://www.monstertrans.com/store/categories/Transfer-Case/GM-Chevrolet/NP-205/

and

http://www.monstertrans.com/store/categories/Transfer-Case/GM-Chevrolet/NP-203/

Watch the different types of '205, based on the size/style of input.

-- A

 

[digitalepiphany]

Sorry, that's what happens when I'm not paying attention to all the tabs I have open at once.

This is what I meant: http://www.northwestfab.com/NP205-Full-Rebuild-Kit-_p_48.html

 

[85 Jimmy]

I knew ORD sold them, just looking for some other options.

 

[muddermilitia]

Don't order from NWF, it took me forever to get my rebuild parts from them. Stick with ORD imo

 

[sweetk30]

if you need step by step with pics on reman of them look here http://coloradok5.com/forums/showthread.php?t=253000

x2 on ord also just easy and super service.

and if doing all that work might wana swap in divorced or ford 32 spline front shaft also for best beefy option 205 case. and for sure twin stick it also .

 

[digitalepiphany]

Don't order from NWF, it took me forever to get my rebuild parts from them. Stick with ORD imo

That's good to know. I was actually looking for a rebuild kit a couple weeks ago, and came across all three of these.

Have you heard anything about the monstertrans kit?

Also, thanks for the link sweetk30.

 

[85 Jimmy]

if you need step by step with pics on reman of them look here http://coloradok5.com/forums/showthread.php?t=253000

x2 on ord also just easy and super service.

and if doing all that work might wana swap in divorced or ford 32 spline front shaft also for best beefy option 205 case. and for sure twin stick it also .

I have your doubler build bookmarked
I'll have to look for ford 32 spline front output to throw in it. Also need to get a sye from 1-tonmudder.

 

[k30bb468]

Gasket & seal kits
http://www.natauto.com/transfer-case/transfer-case-overhaul-kits/

Gasket Kits
http://www.natauto.com/transfer-case/transfer-case-gasket-sets/

EBAY
http://www.ebay.com/itm/GM-Chevy-Dodge-Transfer-Case-Bearing-Kit-NP205-205C-205-/170601739909

NP205 Master rebuild kit
http://www.quad4x4.com/cgi-bin/commerce.cgi?preadd=acton&key=2074

NP203 Kits
http://www.drivetrain.com/parts_catalog/transfer_case_replacements_and_parts/np203.html

 

[sweetk30]

"Also need to get a sye from 1-tonmudder."

he also has 32 spline fronts .