I just replace the 350 transmission and 203 TC in my 74 K5 with a 700r4 and a 208 TC. I’m not a fan of the 80’s shifter and assembly. I’m wondering if there is away to use my my 1974 shifter for the 203TC with the 208? I would appreciate any insight.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Transfer case shifter dilemma
- Thread starter Squared73
- Start date
Think this thread will be your beat bet
ck5.com
NP 241 shifter...
Pretty much sets it for me. My trans has to come out anyway so I’m flipping the 241 shifter around. I have a 203/205 boot too on mine too but it’s ratty. I’ve got another one that’s in better shape I’ll put back on with it. Thanks for the inspiration guys.
ck5.com
Anything is possible with modification and fabrication.
IMO your current shifter would need torn apart to eliminate the 2nd shift arm to reduce drag in the shifter and clean things up.
Then you would need to decide if you want it in the factory hole in the floor. If so, you will need to figure out how to move the shifter forward since the 700R4 is longer.
And also need to find out if the 203 shifter has enough throw available for the 208. I would guess that it does, but verification would be good.
