TRE PART #'S

[jackedjimmy]

TRE PART #\'S

I'm looking for a TRE with the large GM taper for a D60. It needs to be 3/4 inch threads, (one right hand and one left hand) with hopefully 1.5-3 inches of thread length.

I got theses part#'s off rockstomper but it didnt say what they were for...ES2234R and ES2010L

If these are the ones,are those numbers universal(can I get them at NAPA)

If they aren't the ones...could someone give me the right numbers or a make/modle that mould have the same thing stock.

I'm going to be making my own tierod and draglink out of shelby tubing soon and would need these prior.

Thanks

 

[Zeus33rd]

Re: TRE PART #\'S

I don't know if these are the right numbers, but I got them from the Part #'s thread in the Bloody Knuckle forum...

TRE's for the biggest "rod".
ES2234R ---$24 in stock
ES2010L ----$39 special order

 

[tjayandlisa]

Re: TRE PART #\'S

tre part number es2234r(short chevy tie rod) and 2010L (short Dodge)is for the 7/8-18 thread not 3/4-16 that you said, you need the ES150R and ES150L but not sure if it will fit the d60 arm(you have),as most use the bigger taper

 

[jackedjimmy]

Re: TRE PART #\'S

so both those are a 7/8-18 and one of them is left hand thread? Are those an aftemarket number or a Gm/dodge number?
Thnks for the info

 

[tjayandlisa]

Re: TRE PART #\'S

yes the L or R dictates Left or right and those part numbers can be used at napa,autozone,kragens etc. Go with the Moog brand, is best IMO

 

[jackedjimmy]

Re: TRE PART #\'S

Anyone else?.....I'm looking for ends that with fit a D60 taper but with 3/4 treads. I know this is a case where bgger is better, but I already have left and right hand 3/4 taps.

Thanks For the #'s TJANDLISA