Skull Rider
Newbie
Ok well so its not going to be a full on Truggy but i still need to ask as i have serched in the garage forum and the COG forum and can't find the answer or pic i'm looking for.
I have an 84 blazer which has seen its last days as a full blazer.I was moving with it and the weight of my big Butt finally made the flooring give out and well the tail gate is just barely hanging on and there is not much left of the original flooring under the drivers side seat area anyway short story it is rusted out complete.That being said the frame and running gear is still very good.
Due to cost efective thoughts i have a 83 1/2 ton cab i know it will go on the frame and i know the back of the cab is where the prob is with the mounts. But i have not been able to find a good pic of what ppl have done for this prob or anyone person who has written anything on this one area of a build like this.
I have found a few shots of some bracing that has been made but they were just basicaly pics with a small glimps of the brace that just happen to be in the shot.
I'am looking for a few good shots for some idea of what im going to have to build to put my cab on my frame.or possably measurments of how much the frame drops down so i know how high i need to come up.
I don't have a shop to let this sit in to figure it all out so im just trying to get a good plan going so i know where i will be at when i set the cab on to shortin the down time and the time it is sitting in the street with no body on the frame.
Thanks For any info
or just point me in the direction i need to go.
Travis
AKA Skull Rider
I have an 84 blazer which has seen its last days as a full blazer.I was moving with it and the weight of my big Butt finally made the flooring give out and well the tail gate is just barely hanging on and there is not much left of the original flooring under the drivers side seat area anyway short story it is rusted out complete.That being said the frame and running gear is still very good.
Due to cost efective thoughts i have a 83 1/2 ton cab i know it will go on the frame and i know the back of the cab is where the prob is with the mounts. But i have not been able to find a good pic of what ppl have done for this prob or anyone person who has written anything on this one area of a build like this.
I have found a few shots of some bracing that has been made but they were just basicaly pics with a small glimps of the brace that just happen to be in the shot.
I'am looking for a few good shots for some idea of what im going to have to build to put my cab on my frame.or possably measurments of how much the frame drops down so i know how high i need to come up.
I don't have a shop to let this sit in to figure it all out so im just trying to get a good plan going so i know where i will be at when i set the cab on to shortin the down time and the time it is sitting in the street with no body on the frame.
Thanks For any info
or just point me in the direction i need to go.
Travis
AKA Skull Rider
