twin stick

[pennsylvaniaboy]

ok guys i kno this has been discussed a million times etc. i am a newb to this to a degree but i have searched and cannot find anywhere a write up on a twin stick mod that has good measurements. i have a fll on shop and dont want to spend $100 to get rails done. i want to do it myself and be done. does anyone here have good measurements, or kno of some good tech articles. aslo wanted to see some pics of how the shifters were set up

 

[Big91RustyBucket]

Search For it . Or use Google. There are so many article's out there. If you can't find one you arn't looking.

 

[pennsylvaniaboy]

thanks cheif and notice i said that i did. what i can find are one with good measurements and how ppl made their own shifters

 

[Big91RustyBucket]

Let Me look . I know there are lot's of them on pirate . Brb.....

 

[Big91RustyBucket]

http://www.clubfte.com/users/ivanribic/page2.html

http://www.google.com/search?hl=en&q=twin+stick+np205&btnG=Google+Search

Should be all you need.

 

[b454rat]

It's pretty easy to do, IF it's out of the truck. I did mine on the floor, and made it alot easier. There is alot of grinding and test fitting involved, so would be easier out.

 

[pennsylvaniaboy]

b454rat u got any pics or where u got the info from i got a rear fixed yoke im waiting to put in with a doubler setup so its just sitting around begging to be twined

 

[b454rat]

This is where I got mine from. The article is for a Ford, but works the same as a GM, just the rail is in a different location, but either way it's the one that is closest to the front output.

http://www.clubfte.com/users/ivanribic/page2.html

 

[MattK]

Article I used: http://www.offroad-tech.com/tech/twinstick205/