CherryK5
1/2 ton status
Could I use two piston front calipers from a dodge on my 10b to replace my single piston calipers?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
two piston calipers from dodge d44
- Thread starter CherryK5
- Start date
If i'm not mistaken Dodge used a thinner rotor than Chevy so the answer would be no.
sounds right scott as dodge 60's used a thinner rotor i for sure know of over the gm 60.
True, but the Dodge 60's use the same calipers as GM's even though they have a thinner rotor
were talking 10 bolts here...
Right, it was suggested that because they used a thinner rotor the calipers must be different and won't work and I suggested that isn't always the case.
kevin400ex
1/2 ton status
compare them side by side at the parts store.
CherryK5
1/2 ton status
Da**it. Of course you pull out the obvious answer. I didn't even think of that.
if i recall dodge was bendix brakes and gm was gm style. 2 totaly diffrent hold down systems.
you would have to prob use the dodge caliper mount also.
you would have to prob use the dodge caliper mount also.
