Moose
1/2 ton status
I tried doing a search and can't find it. Someone posted the part number for a ujoint that takes your 1/2 ton drive shaft and mates it to a 14 bolt.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
U joint Help
- Thread starter Moose
- Start date
It was a NAPA part #447.
<font color=blue>~BigBurban</font color=blue>
http://www.geocities.com/crash607
<font color=blue>~BigBurban</font color=blue>
http://www.geocities.com/crash607
Obviously the best thing to do is change the output yoke of your tcase to 1350 and get a 1-ton driveshaft.
I threw my 1310 driveshaft (shortly after the 12-bolt exploded) so my choice was a little easier.
-- Mike
I threw my 1310 driveshaft (shortly after the 12-bolt exploded) so my choice was a little easier.
-- Mike
Zepplin
1/2 ton status
WHEN I THREW A 14 BOLT IN THE REAR OF MINE I TOOK THE DRIVESHAFT TO A SHOP TO WELD ON A 1 TON YOKE AND IT ONLY COST $90 WITH THE LARGER U-JOINT INSTALLED.
DAZED AND CONFUSED IN A 74 BLAZER
ZEPPLIN
DAZED AND CONFUSED IN A 74 BLAZER
ZEPPLIN
drivelineman
1/2 ton status
- Joined
- Aug 23, 2000
- Posts
- 706
- Reaction score
- 0
ITS A NEAPCO # 2-3050 - 1310 -1350 series - check out my site- http://www.highangledriveline.prodigybiz.com
