What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

u joint

86chevybanshee

86chevybanshee

1/2 ton status
Joined
May 15, 2004
Posts
917
Reaction score
0
Location
beverly MA
i need the part number for a u joint, i have a 1/2 ton drive shaft and a 3/4 sf its for an 86 truck not a blazer, i checked out the other posts and the part numbers dont come up on the computers, i perfer napa or spicer joints, thanks /forums/images/graemlins/truck.gif
 
Napa numbers...

10 to 14 - 447
12 to 14 - 348

I think thats right /forums/images/graemlins/waytogo.gif


Welcome to the site by the way! /forums/images/graemlins/peace.gif
 
[ QUOTE ]
how come when i enter the part number on to the napa website it dosnt come up?

[/ QUOTE ]

Because its not for a stock appliction it's a conversion joint.
 
[ QUOTE ]
napa has them for about $20 /forums/images/graemlins/thumb.gif

[/ QUOTE ]


Maybe it's the area i live in, but sheesh, i wish it was like $20, i had to pay close to $40 for mine, and it died about 8 months after installation. Had a nice what,,,30-90 day warranty?

Went to the local Autojunk store and bought two of them for much cheaper, still using the first one and have a spare too., Those there were like $23 if i remember right.
 
so when i got to napa do i tell them the part numbers and they take 2 joint and put the caps on them or somehting
 
No they come already set up the way you need it. I just bought a 447 on Sat and it was sealed in a bag in the box.

By the way that is a greasable u-joint, not solid.

I don't even know if you can get them solid....Tim, what say you.
 
Nope, that's what seems to suck about most conversion joints, they don't come non-greasable.

Some do, but not very many.

If they took two joints and switched the caps, not only would the caps not fit, but they'd be the wrong width.
 
You must log in or register to reply here.

Latest Posts

Top Bottom